Home › Concrete and Block Masonry
Our block masonry crew in Orlando, FL builds durable concrete block walls for privacy, security, and structural support. From new CMU walls and fences to crack repairs and reinforcement, we pour solid foundations and use proper reinforcement. Your block masonry will stand true and protect your property over time.
Legendary Masonry Orlando provides professional block masonry throughout Orlando, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 689-264-5946 or request your free quote.
Concrete & Block Masonry for Orlando Homes and Businesses
At Legendary Masonry Orlando, concrete and block masonry is one of the core ways we build and repair the structures people use every day. From block walls around a Conway backyard to new block rooms in a Pine Hills addition, we work with concrete block (CMU), poured concrete, and reinforcing steel to create strong, long lasting results that handle Central Florida weather.
When you call us, we start by asking how the space will be used. A decorative block garden wall at a Lake Nona home is built very differently than a load bearing block wall in a warehouse near the airport. We look at height, soil conditions, drainage, nearby trees, and how much weight the structure must support. For Orlando projects, we also consider hurricane wind loads and heavy summer storms, because that decides how deep footings need to be and how much reinforcing steel we install.
From there we help you pick materials. Hollow CMU block, filled and reinforced, is common for structural walls. Solid block, split face block, and decorative veneers are options for visible surfaces. We can finish block with stucco, paint, or a stone veneer if you want something more upscale than plain concrete. Legendary Masonry Orlando walks you through those options with real examples and local projects, so you can see how each choice will look and perform in our climate.
How Block Masonry Is Actually Built, Step by Step
Good block masonry in Orlando always starts with a solid base. We excavate for the footer, typically below the loose topsoil until we reach firm ground. For most residential walls we pour a reinforced concrete footing that is wider than the wall itself, using rebar cages tied together so the concrete and steel act as one unit. In areas with poor drainage, like low spots in Apopka or near retention ponds, we may go deeper or wider and include gravel for better support.
Once the footing cures, we lay the first course of block. This is the most important row, and we take time to get it perfectly level and straight, using laser levels and string lines. Any mistake here will show up in every course above. We bed the blocks in mortar, then tap them into place so the wall is plumb. Vertical rebar is set into the footing and run through the block cores at specific intervals that match engineering guidelines and local code.
As the wall goes up, we stagger the joints for strength and keep joint thickness consistent. For structural walls, we often fill the rebar cores with concrete grout, which turns the block cells into reinforced columns. Where we know there will be doors, windows, or gates, we install lintel blocks or poured concrete beams so there is proper support above the opening. At the top of the wall we typically pour a bond beam, a continuous reinforced concrete cap that ties everything together.
After the block work, we address finishes and waterproofing. Exterior block walls in Orlando are commonly coated with stucco or elastomeric paint to seal pores and limit moisture intrusion. For retaining walls or areas that face constant sprinkler overspray, we can apply waterproof membranes or drainage mats on the back side. Every step is about making sure the wall looks right, drains correctly, and handles our hot, stormy weather without cracking or leaning.
Common Orlando Problems With Concrete & Block, And How We Fix Them
Orlando homeowners and property managers call Legendary Masonry Orlando for many of the same block masonry issues. We see a lot of leaning or bowing walls where soil behind the wall was never drained correctly. In those cases we assess whether we can stabilize the wall with new footings, added buttresses, or tie backs, or if it needs partial or full rebuilding. We combine repairs with added drainage, like weep holes, French drains, or gravel backfill, so the same problem does not come back after the next rainy season.
Cracking is another big concern. Hairline cracks in mortar joints can be cosmetic, but wider cracks, stair step cracking, and vertical separation between wall sections can signal movement. We inspect the entire structure, check drainage patterns, and look for tree roots or nearby construction that might have changed the soil. Depending on what we find, repairs might involve stitching the masonry with helical ties, repointing mortar joints, adding expansion joints, or rebuilding sections from the footing up.
We also fix spalling and surface breakdown caused by constant sprinklers, standing water, or poor quality historic repairs. For these jobs we chip out loose material, clean the surface, and use compatible repair mortars instead of generic patch products that do not bond as well in our heat and humidity. When needed, we add control joints to help the wall move slightly without random cracking. Every repair is done with the Orlando climate and soil conditions in mind, not just a quick patch that will wash out or crack again in a season.
Cost Factors For Block Masonry Projects In Orlando
The cost of block masonry in Orlando depends on more than just how many feet of wall you need. When Legendary Masonry Orlando prepares an estimate, we break down what is driving the price so you can adjust scope and finishes to fit your budget.
Height and structural needs are usually the biggest factors. A short, decorative garden wall with minimal reinforcing will cost less per foot than a tall privacy or retaining wall that must resist wind and soil pressure. Deeper or wider footings, extra rebar, grout filled cells, and bond beams all add cost but also add strength and safety, which is critical in Central Florida storms.
Access and site conditions matter too. Tight backyards in older Orlando neighborhoods may require more hand work and smaller loads because equipment cannot reach the work area. Poor soil that needs over excavation or extra base material will also change the price. If we must protect nearby pavers, landscaping, or pool decks, we include time and materials for that protection and cleanup.
Finish choices create another layer of cost options. Plain block is the most budget friendly. Stucco, stone veneer, brick facing, or custom caps and columns add both material and labor costs. We can often suggest combinations, like a structural block core with a partial decorative veneer only on visible faces, to keep the project attractive and affordable. We also help you plan in phases when needed, such as building the structural wall now and adding finish upgrades later.
What To Know Before You Hire A Block Mason In Orlando
Before you hire any block masonry contractor in Orlando, it helps to have a clear idea of what you want the wall or structure to do. Is it mainly for privacy, appearance, structural support, or security? Legendary Masonry Orlando can help you refine that, but coming in with your priorities makes the design process faster and easier.
You will also want to confirm licensing, insurance, and familiarity with local codes and HOA rules. Block masonry that looks fine in another state might not meet Florida wind or impact requirements. We pull permits when needed, coordinate inspections, and design walls to handle our local conditions, especially in areas more exposed to storm winds like open lots or corners.
Ask about drainage, control joints, and reinforcement, not just the finish. A properly built block wall in Orlando should include a plan for where water will go, how the wall will move slightly without cracking, and how it is tied together from footing to top. When we quote a project, we explain where rebar will be placed, how often we use filled cells, and how we plan to manage water around the structure.
Finally, review real examples of similar work. We can show you completed block masonry projects in Orlando neighborhoods with the same type of soil, exposure, and use that you are planning. That way you can see how different block sizes, finishes, and heights look in person, and you can be confident that what we are proposing is proven to work in our area for the long term.
